Pureco Rust Finish - Part 2 - Rust Finish Activator - 200ml
**Please note this is for Part 2**
Part 1 - Rust Finish Paint
Part 2 - Rust Finish Activator
Part 3 - Matte Sealer
Part 1 - Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action, you must mix the iron particles in that may have sunk to the base.
Can be brushed or rolled on, can be used over any colour paint if you wish. Use a disposable brush preferably not synthetic, apply 2 coats. Allow 6 hours between coats, once the second coat is touch dry, you can move to Part 2.
Part 2 - apply 1 coat of rust finish activator over touch dry rust paint finish after 30 minutes, mist water over the surface, keeping the surface moist for at least 2 hours. For an advanced rust finish you can keep misting for up to 4 days, to speed up the process you can add salt to your spray bottle. Once you have achieved your desired rust finish proceed to Part 3 by sealing with our matte finish.